|
- Fig. 1 MMI: Setting a timer
Applies to vehicles: with auxiliary heating/ventilation
Set the departure time in the timer. The vehicle will be heated (in cold weather) or ventilated (in hot weather) so that the desired interior temperature is reached by the time specified in this setting.
Setting the heating effect
If you want the auxiliary heating to defrost the windows, select: MENU button > Car > control button Systems* > Auxiliary heating > Program timers > Heating effect > defrost.
If you want the auxiliary heating to defrost the windows and heat the vehicle, select: MENU button > Car > control button Systems or Car systems > Auxiliary heating > Program timers Heating effect > warm.
Setting the timer
Select: MENU button > Car control button Systems* > Auxiliary heating > Program timers > e.g. Timer 1: departure.
Set the time and date.
To activate the timer, press the BACK button to go back one level.
Use the rotary pushbutton to confirm the setting and activate the timer. A 
will appear in the box on the right Fig. 1.
will appear in the box on the right Fig. 1.The departure time specifies when the vehicle interior is to reach the desired temperature. The auxiliary heating/ventilation switches off automatically about 10 minutes later.
After the departure time expires, the next calendar date is automatically entered on the MMI. To activate the auxiliary heating/ventilation for the following day, you then only have to confirm the setting (by setting a on the MMI Fig. 1).
on the MMI Fig. 1).Note
- To ensure that the timer operates correctly, check that the correct time and date are entered in the MMI settings. Please refer to the operating manual for your MMI system for details of how to set the date and time.
- The auxiliary heating/ventilation can be switched on/off immediately even if a timer has been programmed. This has no effect on the programmed timer setting as long as the auxiliary heating/ventilation is not switched off manually during the programmed period.