|
- Fig. 1 Position of the bulbs on the bulb carrier (example for left rear light)
- Fig. 2 Position of the bulbs on the bulb carrier (example: left rear light)
Applies to vehicles: with halogen system (A3 Saloon)
The table below gives an overview of the bulb positions.
Bulb -A- has a plug-in connection and can be changed simply by pulling out the old bulb and inserting a new one.
Bulb -B- is secured by a bayonet fastener:
Lightly press the defective bulb -B- into the bulb carrier, then turn it anti-clockwise and remove it.
Fit the new bulb, pressing it into the bulb holder and turn it clockwise as far as it will go.
If necessary, use a cloth to remove any fingerprints from the glass part of the bulb -A- or -B-.
Check whether the new bulb is working.
Re-install the bulb carrier ►Link.
Position of bulbs
| Pos. Fig. 2 |
Bulb function |
| A |
Tail light/brake light |
| B |
Turn signal |