Applies to vehicles: with Rear Seat Entertainment
- Fig. 1 Switching wireless headphones on/off
- Fig. 2 Marking the wireless headphones
(A) Subject
(B) Advice
(B) Advice
| (A) |
(B) |
|---|---|
| RSE control console: The RSE does not turn on. |
Check the child lock settings Link on the MMI. |
| External AV input: The video picture is not displayed correctly. |
For a flawless video picture, the AV standard (PAL or NTSC) must be correctly set in the AV device and in the RSE system. For more information, please refer to Link. |
| Wireless headphones: The connection status of the wireless headphones is not correct Link. |
Switch off the wireless headphones and repeat the steps for switching them on. When switching the headphones on, make sure that you press and hold the on/off button  -1- Fig. 1 on the right headphone (R) only for approx. 3 seconds and then let it go as soon as the LED -2- starts flashing Fig. 1. |
| Wireless headphones: The left/right wireless headphones have been interchanged. |
You can identify which of the RSE displays the wireless headphones are assigned to by the sticker on the inside of the left/right wireless headphones Fig. 2. It is important that you connect only the set of headphones that is assigned to the RSE display. |
| Wireless headphones: Not functioning. |
Check that the wireless headphones have been bonded to the RSE once Link.
Or: The batteries should be charged/changed Link. |
| Wireless headphones: A connection could not be established. |
Switch off the wireless headphones and repeat the steps for switching them on. |
If the suggested solutions could not help you, please contact an Audi dealer.